G41在线式短波红外热成像测温仪

2025/11/05 Metallurgy Furnace Metallurgy Scientific Research 4

Product Profile

G41在线式短波红外热成像测温仪采用高性能短波红外探测器、短波红外镜头和信号处理电路，并嵌入先进的图像处理算法，具备体积小、功耗低、启动快速、成像质量优异、测温精准，测温范围宽，适合超高温测温现场等特点。

G41在线式短波红外热成像测温仪的器件选型充分考虑高低温工作性能的要求，保证整机工作有优异的环境适应性能。

Functional Characteristics

1、具有全天候被动热成像功能，具有穿透玻璃的能力，可在较宽的环境温度范围使用；

2、采用高帧频设计，最高帧频可达125Hz，可以观测快速移动的目标；

3. Adopt self-developed temperature measurement correction algorithm to realize accurate temperature measurement;

4. The full stream lossless 16bit temperature data is output, and the client software and SDK development kit are provided to facilitate the secondary development and system integration of customers, and fully carry out personalized temperature analysis of the tested target.

Application Scenario

钢铁冶金、激光焊接、激光熔覆、激光光斑检测、增材、高温测温生产检测、科学研究、定制开发

Specifications Common Problem

IR Detector
Detector Type	Uncooled Focal Plane Microbolometer
Resolution	1280×1024
Pixel Size	4μm
Spectral Range	0.8～2μm
Frame Rate	≤125Hz（可配置）
Image Processing And Display
Palette	A variety of color palettes, including white heat, black heat, iron red, rainbow, etc
Contrast And Brightness	Automatic / Manual
Data Format	16bit Temperature Data (full Code Stream)
Temperature Measurement Analysis
Temperature Measurement Accuracy	±1%
Measuring Range	600℃～2500℃ (可扩展到3000℃）
Electrical Characteristics
Data Interface	RJ45
Web Standard	GigE
Protocol Support	GigE Vision V2.0协议以及GenICam标准
Power Interface	2EDGKD-3.81mm/2P
Input Power Supply Voltage	12VDC
Steady State Power Consumption	<2.5W
Reverse Connection Protection	Have
Overvoltage And Undervoltage Protection	Have
Environmental Parameters
Operation Temperature	-20℃～60℃
Storage Temperature	-40℃～70℃
Resistance To Temperature Shock	5℃/min（-40℃～60℃）
Vibration Resistance	4.3g, 2 hours for each axis of x, y and z axes
Shock Resistance	Acceleration 30g, Half Sine Wave, Pulse Width 6ms, Impact 3 Times In The Direction Of Installation And Use
Humidity	≤ 95% (non condensing)
Camera Lens
Focal Length	可选配
Focus Mode	Manual
Physical Characteristics
Overall Dimension	45mm×45mm×79mm
Weight	<160g
Mounting Hole	四周M3×4
Client
Real Time Temperature Display	Support
Multiple Temperature Measuring Objects	Support
Caution Function	Support
Video Recording / Photographing / Playback	Support
SDK development kit
Operating Environment	支持win32、x64、Linux(x86/ARM)
数据获取	通过回调函数获取16Bit温度数据（全码流）

一、上位机运行异常
Possible causes:
The necessary runtime library (EXE or credist_vs2013.x86.exe under the installation software directory) is missing
The software does not support the operating system used (replace the operating system or computer)
二、软件检测不到相机IP地址
Possible causes:
The computer firewall blocks network transmission (turn off the firewall, or add the software to the firewall white list)
The software detects the IP address of the camera, but there is no image output or image jam
Possible causes:
Insufficient bandwidth (check whether the camera network card is gigabit network. It is recommended to use gigabit network. The 100m network camera will automatically reduce the frame rate)
Network card configuration problem (for 100Hz or 200Hz high frame rate cameras, you need to turn on the giant frame function of the network card)
The computer local IP is not in the same network segment as the camera IP (modify the computer local link IP address, which is in the same network segment as the camera, and is not the same as the camera
The software does not support the operating system used (replace the operating system or computer)
四、测温偏差大
Possible causes:
The use environment is beyond the scope of product use (use appropriate cooling measures)
Temperature section mismatch (select the appropriate temperature section for temperature measurement)
五、图像闪烁或出现花屏现象
Possible causes:
The power supply voltage or power does not meet the requirements of the camera (replace the power supply)
Camera hardware failure (return to factory for maintenance)

Previous: NX51系列在线式红外热成像测温仪 Next: G43在线式短波红外热成像测温仪

Relevant

展开更多