K26E50M33 在线式微距红外热成像测温仪

2025/11/24 Scientific Research Scientific Research 42

Product Profile

K26E50M33 在线式微距红外热成像测温仪采用 17μm 非制冷红外焦平面探测器、高性能红外镜头和信号处理电路，并嵌入先进的图像处理算法，具备体积小、功耗低、启动快速、成像质量优异、测温精准等特点。

K26E50M33 在线式微距红外热成像测温仪的器件选型充分考虑高低温工作性能的要求，保证整机工作有优异的环境适应性能。

Functional Characteristics

1. It has all-weather passive thermal imaging function, has strong smoke penetration performance, and can be used in a wide range of ambient temperatures;

2、采用微距镜头，最小可分辨 33μm 的微小目标；

3. Adopt self-developed temperature measurement correction algorithm to realize accurate temperature measurement;

4、输出全码流无损 16Bit 温度数据，提供客户端软件及 SDK 开发包，便于客户进行二次开发和系统集成，充分对被测目标进行个性化温度分析。

Application Field

Scientific Research Institutions, Optical Fiber Testing, Nondestructive Testing, Customized Development

Specifications Common Problem

IR Detector
Detector Type	Uncooled Focal Plane Microbolometer
Resolution	640×480
Pixel Size	17μm
Spectral Range	8～14μm
NETD	≤50mk@30℃
Frame Rate	≤ 50Hz (configurable)
Image Processing And Display
Palette	A variety of color palettes, including white heat, black heat, iron red, rainbow, etc
Contrast And Brightness	自动 / 手动
Data Format	16Bit 温度数据（全码流）
Temperature Measurement Analysis
Temperature Measurement Accuracy	±2℃ or ±2%
Measuring Range	常温档：-20℃~200℃ 中温档：50℃~800℃

	高温档：50℃~1600℃
Electrical Characteristics
Data Interface	RJ45
Web Standard	100M Network / Gigabit Network (100M network needs to reduce the frame rate)
Protocol Support	UDP
Power Interface	2EDGKD-3.81mm/2P
Input Power Supply Voltage	12VDC
Communication Interface	UART@RS485 (anti control platform and camera)
Steady State Power Consumption	<2.5W
Reverse Connection Protection	Have
Overvoltage And Undervoltage Protection	Have
Environmental Parameters
Operation Temperature	-40℃~60℃（-20℃~60℃保证测温精度）
Storage Temperature	-45℃~70℃
Resistance To Temperature Shock	5℃/min（-40℃~60℃)
Vibration Resistance	4.3g ，x 、y 、z 轴每轴 2 小时
Shock Resistance	加速度 30g ，半正弦波，脉冲宽度 6ms ，安装使用方向冲击 3 次
Humidity	≤ 95% (non condensing)
Camera Lens
Focal Length	无热化 50mm(F#1.2)
Focus Mode	Manual
最小可分辨尺寸	33 μm
观测范围	21mm× 16mm
物距	10.3cm
Physical Characteristics
Overall Dimension	56.9mm×56.9mm×107.2mm
Weight	<330g
Mounting Hole	16-M3×4
Client
Real Time Temperature Display	Support
Multiple Temperature Measuring Objects	Support
Caution Function	Support
Video Recording / Photographing / Playback	Support
SDK 开发包
Operating Environment	支持 win32 、x64 、Linux(x86/ARM)
数据获取	通过回调函数获取 16Bit 温度数据（全码流）

一、上位机运行异常
Possible causes:
The necessary runtime library (EXE or credist_vs2013.x86.exe under the installation software directory) is missing
The software does not support the operating system used (replace the operating system or computer)
二、软件检测不到相机IP地址
Possible causes:
The computer firewall blocks network transmission (turn off the firewall, or add the software to the firewall white list)
The software detects the IP address of the camera, but there is no image output or image jam
Possible causes:
Insufficient bandwidth (check whether the camera network card is gigabit network. It is recommended to use gigabit network. The 100m network camera will automatically reduce the frame rate)
Network card configuration problem (for 100Hz or 200Hz high frame rate cameras, you need to turn on the giant frame function of the network card)
The computer local IP is not in the same network segment as the camera IP (modify the computer local link IP address, which is in the same network segment as the camera, and is not the same as the camera
The software does not support the operating system used (replace the operating system or computer)
四、测温偏差大
Possible causes:
The use environment is beyond the scope of product use (use appropriate cooling measures)
Temperature section mismatch (select the appropriate temperature section for temperature measurement)
五、图像闪烁或出现花屏现象
Possible causes:
The power supply voltage or power does not meet the requirements of the camera (replace the power supply)
Camera hardware failure (return to factory for maintenance)

Previous: KD23E50M33在线式微距红外热成像测温仪 Next: 微距系列在线式红外热成像测温仪

Relevant

展开更多